9: Patch Creation/Morphing - Yamaha DX7 SuperMAX+ User Manual

9: Patch Creation/Morphing

The Rolling Mode, Sound Creator and Velocity Cross-switch modes allow as
many as 4 separate sounds to be assigned to a performance controller and then
used in a rotational or random manner.
The Sound Creator can also be used to reveal sounds that exist between 2 user-
selectable sounds. In this way, limitless new sounds can be created without
extensive FM programming knowledge. The resulting sound can be saved in any
of the 32 memories in each bank.
BUTTON 30: Select Patch Creation/Morphing Mode
By using the Data Slider or +/- buttons you can select the mode you wish to
employ. All three options are shown above.
BUTTON 31(a): Choose Rolling Mode Controller
Once you have selected Rolling Mode, you must then set the controller that
causes the patch to switch/morph.
The choices for CONT are:
 OFF = Disabled.
 WHEEL = Use the Modulation Wheel to change from the primary sound
to the others selected in Func #32 (below).
 P.BEND = The primary sound is available with the Pitch Bend Wheel in
it's central position. Sound 2 when bend is up and sound 3 when bend is
down.
DX7 SuperMAX+
© 2018 MusicTechnologiesGroup.com & MAXsystems
Rolling Mode
Sound Creator
Velocity XSwitch
Rolling Mode
CONT=OFF
Page 21 of 32 User Guide