Advertisement
A. Insert a power cord into the main Inlet.
B. Turn the power switch ON
C. Before the switch turn it off, you better to set all buttons & indicators to "Minimum" or "OFF"
1
. How to use HSS mode
HSS function is possible only with SWING III
SWING III has two version. Canon, Nikon.
Before using HSS mode, please, check your Camera
and SWING III version.
Press, '+' button for 2 sec of SWING III Transmitter.
-
Press, 'RPT/HSS' mode button(A1) for 2 sec on i-
-
flash's control panel
The capital letter 'H' can support HSS on Dslr Camera's Full frame body type
-
Compatible Camera model : Canon models after Canon 5D..
-
Press, RPT/HSS mode button (A1) again.
The small letter 'h' can support HSS on Dslr Camera's
-
APC-S body type.
Compatible Camera model : Canon models after
Canon 1D..
SWING III (Canon version) is compatible with
Nikon camera up to 1/160sec shutter speed.
How to cancel HSS mode.
Press, 'HSS' button on i-flash control panel.
-
8
Operation Instruction for i flashes
type
Advertisement
