Advertisement
Thank you and CONGRATULATIONS for
purchasing this quality product. Properly
assembled, your racking will beautifully
enhance your wine collection for many
years to come. To assemble, please check
to ensure all necessary parts are included
and follow
the assembly instructions
closely.
If you have any questions or
problems please call customer service toll
free 1-888-373-6057 Monday through
Friday 7:00 am - 5:00pm MST.
Planning to stain?
For best results we recommend
you stain or finish your racking
BEFORE assembly.
[x2] Full Length Vertical Ladder Assembly
[x14] Middle Support
23 15/16"
[x9] Standard Horizontal Connectors
24 13/16"
[x5] Screwless Horizontal Connectors
24 13/16"
ASSEMBLY INSTRUCTIONS
Rectangular Bin / Case Rack
WRA61440
WRA61441, WRA61442
,
Questions?
Toll free 1-888-373-6057 or visit www.wineracksamerica.com
Cordless Drill
PARTS LIST
77 1/8"
[x18] 1 1/4" WOOD SCREWS
Tools For Assembly:
Utility Knife
OR
Finish Nailer
Hammer
[x10] FINISH NAILS
Screwdriver
+
Nail Setter
SMALL BAG OF
WOOD PUTTY
Advertisement
Table of Contents
Related Manuals for Wine racks America WRA61440
Summary of Contents for Wine racks America WRA61440
- Page 1 ASSEMBLY INSTRUCTIONS Rectangular Bin / Case Rack WRA61440 WRA61441, WRA61442 Questions? Toll free 1-888-373-6057 or visit www.wineracksamerica.com Tools For Assembly: Thank you and CONGRATULATIONS for purchasing this quality product. Properly assembled, your racking will beautifully enhance your wine collection for many years to come.
- Page 2 * PLEASE FOLLOW WRITTEN INSTRUCTIONS CAREFULLY 1. Find an open, flat area in which to work. Carefully remove all components from the box and remove banding with a utility knife. Check the parts list to verify package contents. 2. Orient the two vertical ladder assemblies on the floor as shown, then attach 7 standard horizontal connectors to the vertical ladders using the 1 1/4"...
- Page 3 4. Attach the middle screwless connectors so that the top edge of the connectors fit flush with the ladder support pieces on each vertical ladder. Make sure the rack is flat on the floor while attaching the screwless connectors. (figure 4) Secure the screwless connectors using a finish nail gun to drive a finish nail through the connector into each vertical ladder.
- Page 4 7. Stand your rack upright. Anchor the rack to a stabilizing surface (wall, ceiling, another rack) SECURING YOUR RACK TO THE WALL by driving two or more 2 1/2" screws through (top of rack) one or more of the connectors. (figure 8) 8.
Need help?
Do you have a question about the WRA61440 and is the answer not in the manual?
Questions and answers