Advertisement
4 and 6 Column High Reveal
Questions?
888.373.6057
Assembly GUIDE
or visit
wineracksamerica.com
Page 1
Package Contents
tools for assembly
Package Contents
tools for assembly
* All models follow the same assembly procedure varying only in the number of middle ladders your rack will require.
Required
*Please verify that you have the correct number of parts before proceeding.
Depending on the model you purchased, your bundle should contain the following:
DISPLAY TRAYS
END LADDER (X2)
Wood Glue
Screwdriver
Suggested
MIDDLE LADDERS
SIDE DISPLAY PIECE
(OPTIONAL)
STANDARD CONNECTOR (X3)
REVEAL CONNECTOR (X1)
Cordless Drill
Finish Nailer
SCREWLESS CONNECTOR (X2)
+
WOOD PUTTY
FINISH NAILS
WOOD SCREWS
Nail Setter
Hammer
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Wine racks America 6 Column High Reveal
Summary of Contents for Wine racks America 6 Column High Reveal
- Page 1 4 and 6 Column High Reveal Questions? 888.373.6057 Assembly GUIDE or visit wineracksamerica.com Page 1 Package Contents tools for assembly Package Contents tools for assembly * All models follow the same assembly procedure varying only in the number of middle ladders your rack will require.
- Page 2 4 and 6 Column High Reveal Questions? 888.373.6057 Assembly GUIDE or visit wineracksamerica.com Page 2 1. Find an open, flat area in which to work. Carefully remove all components from the box and remove banding with a utility knife. Check the parts list to verify package contents.
- Page 3 4 and 6 Column High Reveal Questions? 888.373.6057 Assembly GUIDE or visit wineracksamerica.com Page 3 4. Secure the remaining standard connector so that the top of the connector is 6" from the bottom of the rack. (figure 3) ATTACH REMAINING...
- Page 4 4 and 6 Column High Reveal Questions? 888.373.6057 Assembly GUIDE or visit wineracksamerica.com Page 4 SECURE SCREWLESS CONNECTOR TO TOP SECURE SCREWLESS CONNECTOR TO MIDDLE SECURE REVEAL CONNECTOR TO BOTTOM 6. Stand your rack upright. Secure the display trays to the rack by adding a bead of wood glue to each of the two grooves on the back of the tray.
- Page 5 4 and 6 Column High Reveal Questions? 888.373.6057 Assembly GUIDE or visit wineracksamerica.com Page 5 7. If you purchased a Side Display High Reveal Rack, secure the side display piece to the rack by adding a bead of wood glue to each of the two grooves on the side display end pieces. Set the side display piece into place so that grooves rest on the lower reveal connector and the standard connector on the back of the rack.
Need help?
Do you have a question about the 6 Column High Reveal and is the answer not in the manual?
Questions and answers