Printek PrintMaster 852si Quick Setup Instructions page 2

PrintMaster 852si Quick Setup Instructions
5
Load Ribbon
tructions
Load the ribbon cartridge by following the instructions
located on the inside of the front lid. NOTE: Do not
tighten the ribbon after installation. If the printer
starts printing very light or will not print at all upon
start up, make sure the ribbon cartridge is properly
snapped in place on the left side.
7
Put Printer Online
ructions
Do not
all upon
Put the printer back "on line" by pressing the ONLINE
button. (The green light should come on).
properly
6
Ribbon Install
Instructions
8
With the printer "off line", selec
print by pressing the UNLOAD
the form name appears on the
LOAD/FEED button to load the
Selecting The
6
Selecting The Form
With the printer "off line", select the form you wish to
print by pressing the UNLOAD/CHANGE button until
the form name appears on the display. Press the
LOAD/FEED button to load the form.
Send Job To Printer
Send your print job to the printer...
Note:
If you plan to do continuous feed print jobs with any of
the PrintMaster 850 Series printers, we recommend that you
purchase the optional Paper Guide (part# 91187)
1517 Townline Road
Benton Harbor, MI 49022
Ph. (800) 368-4636
Web: www.printek.com E-mail: info@printek.com
Fax: (269) 925-8539