Care And Cleaning; Service & Customer Care - Kenwood TCM810 Instructions Manual

4 The lever will automatically rise
at the end of the warming cycle.
Turn the items over and repeat
the operation. Watch to make
sure they do not burn.
5 To remove the warming
rack, allow the toaster to
cool and unplug. Lift off the
warming rack

care and cleaning

1 Before cleaning, unplug your
toaster and let it cool down.
(B) -
2 Push to release and then
slide out the crumb tray
Clean, then replace. Do this
regularly: crumbs can smoke or
even burn. Do not dishwash the
crumb tray.
3 Wipe the outside of the toaster
and the warming rack with a
damp cloth, then dry. Do not
use abrasives.
service & customer
care
If you experience any
problems with the operation of
your appliance, before calling
for assistance refer to the
troubleshooting guide or visit
www.kenwoodworld.com.
If you need help with:
using your toaster or
l
servicing or repairs (in or out of
l
guarantee)
call Kenwood customer care on
Z
023 9239 2333. Have your
model number ready (e.g.
TYPE TCM810) and date code
(5 digit code e.g. 13L35) ready.
They are on the underside of
your toaster.
spares and attachments
l
Z call 0844 557 3653.
other countries
If you experience any problems
l
with the operation of your
appliance, before requesting
assistance refer to the
"troubleshooting guide"
English
.
1
.
7
section in the manual or visit
www.kenwoodworld.com.
Please note that your product
l
is covered by a warranty,
which complies with all legal
provisions concerning any
existing warranty and consumer
rights in the country where the
product was purchased.
If your Kenwood product
l
malfunctions or you find
any defects, please send it
or bring it to an authorised
KENWOOD Service Centre.
To find up to date details
of your nearest authorised
KENWOOD Service centre visit
www.kenwoodworld.com or
the website specific to your
Country.
Designed and engineered by
l
Kenwood in the UK.
Made in China.
l
IMPORTANT INFORMATION FOR
CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE
WITH THE EUROPEAN
DIRECTIVE ON WASTE
ELECTRICAL AND ELECTRONIC
EQUIPMENT (WEEE)
At the end of its working life, the
product must not be disposed of
as urban waste.
It must be taken to a special local
authority differentiated waste
collection centre or to a dealer
providing this service.
Disposing of a household
appliance separately avoids
possible negative consequences
for the environment and health
deriving from inappropriate
disposal and enables the
constituent materials to be
recovered to obtain significant
savings in energy and resources.
As a reminder of the need to
dispose of household appliances
separately, the product is marked
with a crossed-out wheeled dustbin.
7