Call Transfer; Do Not Disturb (Silent Ring) - EnGenius DuraFon Official User Manual

Basic Call Handling
MUTE
1. After a link is established, you can press MUTE (Left) soft key to mute the handset microphone.
2. When mute is active, the other end will not hear your voice, but can still speak to you.
3. To leave the mute state, press UNMUTE (Left) soft key. Mute is effective only for the current call.

DO NOT DISTURB (SILENT RING)

1. Enter the key sequence MENU-3-1, then select "Off." Press SELECT (Left) soft key to confirm your
choice. This will turn off the ringer until it is turned on again from the menu.
2. For temporary silencing the ringer when an incoming call arrives, press SILENT (Left) soft key.

CALL TRANSFER

While a telephone call is in progress, you can transfer it between different handsets.
Direct transfer
1. Press OPTION (Right) soft key, followed by the
2. Press OPTION (Right) soft key, followed by selecting XFER item and then entering the destination
handset ID, then the held call will be transferred directly.
After the call is transferred to the destination handset, the original handset will go back to standby
mode automatically.
Indirect transfer
If you want to talk to the destination handset before the call is transferred, you can follow the below
method:
1. During the call, press the 2-WAY/INTERCOM key, then enter the destination handset ID.
2. Press TALK on the destination handset to answer the intercom call, you can now talk to the
destination handset.
After talking, press END to end the intercom call, and then the destination handset is able to pick up
the incoming call automatically.
After the call is transferred to the destination handset, the original handset will go back to standby
mode automatically.
NOTES:
If the destination handset does not answer after paging it or transferring timeout, the call is routed back
to the originating handset.
hellospoke.com
2. If the operation (e.g., call transfer) fails after putting a call on-hold,
key.
the held call may be dropped.
Notes:
1. Handset LCD displays when a call is on hold. An alert tone (a beep)
Mute
every 30-seconds will remind the handset that a call is on hold.
2. If the operation (e.g., call transfer) fails after putting a call on-hold,
the held call may be dropped.
1. After a link is established, you can press
key to mute the handset microphone.
Mute
2. When mute is active, the other end will not hear your
voice, but can still speak to you.
1. After a link is established, you can press
key to mute the handset microphone.
3. To leave the mute state, press
Notes:
Notes:
Notes:
for the current call.
2. When mute is active, the other end will not hear your 1. The handset can change group affiliations at any time.
1. The handset can change group affiliations at any time.
1. The handset can change group affiliations at any time.
2. The base station is not responsible for group assignments.
voice, but can still speak to you.
Notes:
2. The base station is not responsible for group assignments.
2. The base station is not responsible for group assignments.
Notes:
Consequently, it cannot de-subscribe a handset from a group.
1. Consequently, it cannot de-subscribe a handset from a group. The handset can change group affiliations at any time.
Consequently, it cannot de-subscribe a handset from a group.
1. The handset can change group affiliations at any time.
3. When an intercom caller enters a group ID, all handsets subscribed to
2. The base station is not responsible for group assignments.
3. When an intercom caller enters a group ID, all handsets subscribed to
3. When an intercom caller enters a group ID, all handsets subscribed to
Do Not Disturb (Silent Ring) 2. The base station is not responsible for group assignments.
this group will ring. The first handset to answer will establish a link
3. To leave the mute state, press
Consequently, it cannot de-subscribe a handset from a group. this group will ring. The first handset to answer will establish a link
this group will ring. The first handset to answer will establish a link
Consequently, it cannot de-subscribe a handset from a group.
with the caller. Afterward, it is a one-to-one call, not a one-to-many
for the current call.
3. with the caller. Afterward, it is a one-to-one call, not a one-to-many When an intercom caller enters a group ID, all handsets subscribed to
with the caller. Afterward, it is a one-to-one call, not a one-to-many
3. When an intercom caller enters a group ID, all handsets subscribed to
call.
call. this group will ring. The first handset to answer will establish a link
1. Enter the key sequence MENU-3-1, then select "Off." Press
call.
this group will ring. The first handset to answer will establish a link
with the caller. Afterward, it is a one-to-one call, not a one-to-many
SELECT (Left) soft key to confirm your choice. This will turn
with the caller. Afterward, it is a one-to-one call, not a one-to-many
call.
Call Transfer
Call Transfer
off the ringer until it is turned on again from the menu.
Call Transfer
call.
Do Not Disturb (Silent Ring)
Call Transfer
2. For temporary silencing the ringer when an incoming call
While a telephone call is in progress, you can transfer it between different
While a telephone call is in progress, you can transfer it between different
Call Transfer While a telephone call is in progress, you can transfer it between different
handsets. arrives, press SILENT (Left) soft key.
1. Enter the key sequence MENU-3-1, then select "Off." Press
handsets.
handsets.
While a telephone call is in progress, you can transfer it between different
SELECT (Left) soft key to confirm your choice. This will turn
While a telephone call is in progress, you can transfer it between different
handsets.
off the ringer until it is turned on again from the menu.
Direct transfer
Direct transfer
Direct transfer
handsets.
1. Press OPTION (Right) soft key, followed by the
1. Press OPTION (Right) soft key, followed by the
1. Press OPTION (Right) soft key, followed by the
2. For temporary silencing the ringer when an incoming call
Direct transfer
the call on hold.
the call on hold.
the call on hold.
Direct transfer
arrives, press SILENT (Left) soft key.
1. Press OPTION (Right) soft key, followed by the
1. Press OPTION (Right) soft key, followed by the
2. Press the call on hold. OPTION (Right) soft key, followed by selecting
2. Press OPTION (Right) soft key, followed by selecting
2. Press OPTION (Right) soft key, followed by selecting
*
the call on hold.
item and then entering the destination handset ID, then the
key to put the call on hold.
item and then entering the destination handset ID, then the
item and then entering the destination handset ID, then the
held call will be transferred directly.
2. Press OPTION (Right) soft key, followed by selecting
held call will be transferred directly.
held call will be transferred directly.
2. Press OPTION (Right) soft key, followed by selecting
item and then entering the destination handset ID, then the
item and then entering the destination handset ID, then the
After the call is transferred to the destination handset, the held call will be transferred directly.
After the call is transferred to the destination handset, the
After the call is transferred to the destination handset, the
held call will be transferred directly.
original handset will go back to standby mode automatically.
original handset will go back to standby mode automatically.
original handset will go back to standby mode automatically.
After the call is transferred to the destination handset, the
After the call is transferred to the destination handset, the
original handset will go back to standby mode automatically.
original handset will go back to standby mode automatically.
Indirect transfer
Indirect transfer
Indirect transfer
If you want to talk to the destination handset before the call is
If you want to talk to the destination handset before the call is
If you want to talk to the destination handset before the call is
Indirect transfer transferred, you can follow the below method:
transferred, you can follow the below method:
transferred, you can follow the below method:
Indirect transfer
1. During the call, press If you want to talk to the destination handset before the call is
1. During the call, press
1. During the call, press
If you want to talk to the destination handset before the call is
transferred, you can follow the below method:
handset ID.
handset ID.
transferred, you can follow the below method: handset ID.
1. During the call, press
1. During the call, press
handset ID.
2.
2.
2. handset ID.
Press the of the destination handset to answer the
Press the of the destination handset to answer the
Press the of the destination handset to answer the
intercom call, you can now talk to the destination handset.
intercom call, you can now talk to the destination handset.
intercom call, you can now talk to the destination handset.
2.
Press the of the destination handset to answer the
2.
Press the of the destination handset to answer the
After talking, press
After talking, press
intercom call, you can now talk to the destination handset.
After talking, press
intercom call, you can now talk to the destination handset.
the destination handset is able to pick up the incoming call
the destination handset is able to pick up the incoming call
the destination handset is able to pick up the incoming call
After talking, press automatically.
automatically.
automatically.
After talking, press
the destination handset is able to pick up the incoming call
the destination handset is able to pick up the incoming call
automatically.
automatically.
888 / 955 / 5155
MUTE (Left) soft
MUTE (Left) soft
UNMUTE (Left) soft key. Mute is effective only
UNMUTE (Left) soft key. Mute is effective only
key to put
＊
key to put
＊
key to put
＊
key to put
＊
key to put
~34~ ＊
~34~
key, then enter the destination
key, then enter the destination
key, then enter the destination
key, then enter the destination
key, then enter the destination
to end the intercom call, and then
to end the intercom call, and then
to end the intercom call, and then
to end the intercom call, and then
to end the intercom call, and then
~38~
~38~
~38~
~38~
~38~
L
11
1
00:00:15
MUTE
UNMUTE OPTION
L
11
1
00:00:15
MUTE
UNMUTE OPTION
L
11
1
Joe
033289289
SILENT
L
11
1
Joe
033289289
SILENT
L
L 11
L 11
1
11
1
1
00:00:15
00:00:15
00:00:15
Volume: 3
Volume: 3
L
Volume: 3
11
1
L
11
00:00:15 MUTE OPTION
XFER
MUTE OPTION
XFER 1
MUTE OPTION
XFER
00:00:15
Volume: 3
Volume: 3 You have a
You have a
You have a
MUTE OPTION
XFER
call on hold
call on hold
MUTE OPTION
XFER call on hold
You have a
You have a
UNHOLD call on hold XFER
UNHOLD XFER
UNHOLD XFER
call on hold
L
11
L
11
L
UNHOLD XFER
1
11
1
Enter Ext #:
1
Enter Ext #:
UNHOLD XFER
Enter Ext #:
##
##
L
##
11
1
L
11
Enter Ext #: CANCEL
CANCEL
1
CANCEL
Enter Ext #:
##
##
CANCEL
L
L CANCEL 11
L 11
1
11
1
00:00:15 1
00:00:15
00:00:15
Volume: 3
Volume: 3
L
Volume: 3
11
1
L
11
00:00:15 MUTE OPTION
MUTE OPTION
1
MUTE OPTION
00:00:15
Volume: 3
Volume: 3
MUTE OPTION
L
MUTE OPTION
11
L
11
L
1
11
1
Enter Ext #:
1
Enter Ext #:
Enter Ext #:
##
##
L
##
11
1
L
11
Enter Ext #: CANCEL
CANCEL
1
CANCEL
Enter Ext #:
##
##
CANCEL
CANCEL
EnGenius DuraFon