Technical Data; Maintenance And Care - Stanley FatMax PB2 Instruction Manual

TECHNICAL DATA

ACCURACY (UP): ± 1/8-in at 50-ft (± 3 mm at 15 m)
ACCURACY (DOWN): ± 1/4-in at 50-ft (±6 mm at 15 m)
VISIBILITY RANGE: up to 100-ft (30 m)
SELF-LEVELING RANGE: ± 5° in any direction
INDICATING LIGHTS: Low power: Laser blinks 8 times between 8 sec-
LASER OUTPUT: Class 2M, 1 laser diode, 630–670 nm.
TRIPOD MOUNTING: 1/4-in x 20 (Tripod not included)
ENVIRONMENT: IP 5/4 Dust and Water Protection

MAINTENANCE AND CARE

The PB2 is not waterproof.
Do not allow the unit to get wet. Damage to internal circuits will result.
Do not leave the PB2 out in direct sunlight or expose it to high temperatures.
The housing and some internal parts are made of plastic and may become
deformed at high temperatures.
Do not store the PB2 in a cold environment. Moisture will form on interior
according to the light conditions
ond intervals
Out of level: Laser blinks quickly
POWER: 3 "AA" batteries 1.5 V
0.7-1.0 mW each for class 2M;
WEIGHT: 545 g with batteries
PB2 • 5