Table of Contents
Advertisement
Universal track mount Installation
1.
Install the universal track mount bracket. fIG. D
•
Place the adapter around the track mount and tighten the thumb screws until the
clamp is tight on the track. 1
2.
Hang the ScentDirect™
•
Align the bracket mounting pin into the adjustable connection on top of the
ScentDirect™. Insert the mouning pin once the holes are aligned. 2
•
Adjust the angle of the system so the fragrance output is in the direction of the
area to be fragranced. 3
•
Once the desired angle is achieved, tighten the thumb screw on the top of the
ScentDirect™ to hold it in position. 4
fIG. e
3.
Power the ScentDirect™ fIG. e
•
Install the appropriate convenience power adapter.
•
Plug the power cord into both the adapter and ScentDirect™.
•
Extra power cord can be routed around the wire wraps or tucked into the recess in
the back of the system out of sight.
•
Install the dust cover with the power cord routed out of the slot provided.
fIG. f
Wrap the excess wire around the 3 raised
areas on the top of the ScentDirect™.
TOP VIEW
1
4
31600001-MANUAL-SDD4004-REV.A
6
2
3
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ScentDirect SDD4004 and is the answer not in the manual?