Digital Equipment Pro-face GP2000 Series User Manual page 87

Chapter 6 - Initializing the GP
EPSON PM Series / EPSON Stylus Series
Restrictions for using EPSON PM / EPSON Stylus Series printers
• When printing using an EPSON PM/Stylus (6-color) or an EPSON Stylus (4-color)
printer, GP screen updating (tag processing, etc.) will be slower.
• Since OFFLINE Self-diagnosis (Printer I/F Check) is used only for ASCII code
output, it will not produce a correct printout.
• When screen data printout uses levels of shading, printout from these printers will
differ from a different type printer (PR201, etc.). This is because colors are recog-
nized based on shading level patterns and not on the density of shading.
Extension Settings
When specifying EPSON PM/Stylus (6-color) or EPSON Stylus (4-color) as
"PRINTER TYPE", "PRINT MAGFNIFY" feature for screen data printout can be
specified in the [SET UP PRINTER (EXT-SET)] screen.
Specify either EPSON PM/Stylus (6-color) or EPSON Stylus (4-color) as "PRINTER
TYPE", and touch the
[SET UP PRINTER (EXT-SET)] screen will appear. Touch the desired magnification.
When specifying "PRINTER TYPE", except for EPSON PM/Stylus (6-color), EPSON
Stylus (4-color) printers, touching the
Touch the
6-18
key.
key, and the [SET UP PRINTER] screen will reappear.
key causes the following screen to appear.
GP-2300/2301 Series User Manual