No Display - Digital Equipment Pro-face GP2000 Series User Manual

Chapter 7 - RUN Mode and Errors

7.3.2 No Display

Follow the flowchart below when the screen does not display when powering up,
or the screen turns OFF by itself during RUN mode, to find an appropriate solu-
tion.
YES
Disconnect the SIO and AUX cable.
7-8
No Screen Display
Has data transferred
from the Screen
editor?
YES
Does the Status LED
light turn On?
NO
Is it using the correct
rated voltage?
YES
Unplug the GP's power cord.
Is the power cable connected
properly to this unit?
YES
Does turning ON the
power one more time
cause a display?
NO
Transfer screen data from the
NO
screen editing software.
"Data Transfer"
NO Use the correct rated voltage.
"Specifications"
Fix the power cable connection.
NO
lation and Wiring"
YES
Turn Off the power and reconnect
the SIO cable, or the AUX cable.
GP-2300/2301 Series User Manual
Chapter 4,
Chapter 2,
Chapter 3, "Instal-