Niceboy PILOT XR Manual page 19

1. Adhesive part of the magnetic holder – serves to
attach the holder to the windscreen.
2. Operation LED – indicates that the camera is on.
3. Speaker – serves to play sounds.
4. Lens – whole-glass lens serves to capture video and
photographs.
5. Magnetic holder with an integrated GPS – serves to
attach the camera using magnets and to receive GPS data.
6. Display – 2.45" camera display.
7. Up button/Wi-Fi/Zoom on – serves to move in the
menu. Press and hold the button in the standby mode (the
camera is not recording video and the settings menu is
not open) or while recording video to switch on the digital
zoom. Shortly press the button in the standby mode to
switch on the Wi-Fi.
8. Menu/Mode change/Emergency recording – shortly
press the button in the standby mode to enter the
video/photograph settings menu (based on the chosen
mode); press again to enter camera settings. In the video
playback mode, press to reach delete, video lock/unlock
or slideshow options. Press and hold in the standby mode
to switch between the video recording mode, photograph
mode and video playback mode. Press during video recor-
ding to start emergency recording – this function locks the
video to protect it from accidental deletion and the video
will be stored in a special folder on the card. Such a video
will not be deleted even if the card is full.
9. Down button/Microphone on and off/Zoom off –
serves to move in the menu. In the standby mode and
while recording video, press this button to switch on/off
the camera microphone. If zoom is on, it can be switched
off by pressing and holding the button.
10. Indication LED – permanent red light means that the
camera is on. Blinking blue light means that the camera is
recording video.
19