4. Setup
Upon receiving this machine, remove all packing material and check the machine and
components for damage or missing parts. Contact the manufacturer if damage or missing parts
are found.
4.1
Component Identification
PRESSURE TANK
ACTUATOR
ROLLER TRACKS
FORK POCKETS
PRESSURE GAUGE
MANUAL DISCHARGE VALVE
Presto Lifts
The machine must only be used on flat, level surfaces. Uneven surfaces
can cause instability when loading which could lead to the load falling
and injuring the operator. The base frame must be level during use.
To prevent damage to the machine, do not lag the machine to the floor.
HOSE TO ACTUATOR
VALVE STEM
PRESSURE RELIEF VALVE
9
ROTATOR RING
LEG SET
MAINTENANCE PINS
(BOTH SIDES)
ROLLER TRACKS
(BOTH SIDES)
P3 All-Around Air Manual