Introduction; Specifications; Responsibilities Of Owner And Users - Presto Lifts P3 All-Around Air Owner's Manual

1. Introduction

1.1

Specifications

Load Dimensions
Compressed Height
Extended Height
Maximum System Pressure (Unloaded)
Maximum System Pressure (Loaded)
Safety Relief Valve Setting
Rotating Ring, Outer Diameter
Rotating Ring Inner Diameter
Shipping Weight
Operating Environment
Operating Temperature
1.2

Responsibilities of Owner and Users

Basic Principles - Owners/users shall apply sound principles of safety, training, inspection,
maintenance, and expected operating environment. It shall be the responsibility of the owner/user
to advise the manufacturer where deflection may be critical to the application.
Manuals - Owners/users shall keep and maintain a copy of the operating and maintenance
manual(s) and ensure its availability to operating and maintenance personnel.
Inspection and Maintenance - It shall be the responsibility of the users to inspect and
maintain the machine as required to ensure proper operation. The frequency of inspection and
maintenance shall be based upon the manufacturer's recommendations and be compatible with
operating conditions and the severity of the operating environment. Machinery that is not in proper
operating condition shall be immediately removed from service until repaired. Maintenance and
repairs shall be made by a qualified person and the repairs shall be in conformance with the
manufacturer's recommendations.
Maintenance Safety Precautions - Before adjustments and repairs are started on the machine,
the following precautions shall be taken as applicable:
1. Remove the load from the machine.
2. Other precautions and directions as specified by the manufacturer.
Replacement Parts - When parts or components are replaced, they shall be replaced with parts
or components approved by the original manufacturer.
Maintenance Training - The user shall ensure only qualified personnel inspect and maintain the
machine in accordance with the manufacturers recommendations.
Presto Lifts
Load Capacity
Base Frame
Air Source
400 to 4500 lb. / 180 to 2040 kg.
50" x 50" x 72" / 1270 mm x 1270 mm x 1800 mm
36" x 36" / 915 mm x 915 mm
9 1/2" / 240 mm
27 3/4" / 705 mm
80 PSI / 5.5 BAR
30 PSI / 2.1 BAR
65 PSI / 4.5 BAR
125 PSI / 8.6 BAR
43 5/8" / 1110 mm
40 5/8" / 1030 mm
450 lb. / 205 kg. (Approximately)
Indoor Only
0°F to 120°F / -18°C to 50°C
4
P3 All-Around Air Manual