Table of Contents
Advertisement
5.2
Fork Truck or Stacker Loading & unloading
When loading and unloading with a fork truck or stacker, the load should be distributed evenly on
the pallet.
When placing a pallet onto the machine, slowly lower the pallet onto the platform until the load is
completely supported by the machine. Slowly remove the forks from the pallet.
When removing the load from the machine, slowly insert the forks into the pallet and slowly lift the
pallet off the platform to avoid sudden changes in height which can damage the machine or cause
injury.
5.3
Transporting
The machine can be transported with or without a load on the platform. If transporting the machine
with a load on the platform, always secure the load to the platform and secure the turntable from
rotating unintentionally.
The machine can be transported by an appropriately rated fork truck or stacker, or by the optional
portability kits.
5.3.1 Transporting with Fork Trucks and Stackers
Insert the forks into the fork pockets and raise the machine off the floor. Move the machine to the
desired location and lower the machine onto the floor. Remove the forks from the fork pockets.
5.3.2 Transporting with Portability Kits
5.3.2.1 Caster Package
If equipped with the caster package, always
engage the floor lock before loading and
unloading. Disengage the floor lock to move
the machine to the desired location.
Presto Lifts
Do not drop the pallet onto the platform or damage may occur.
Failure to secure the load and turntable while transporting can lead
severe injury.
Do not drop the machine onto the floor or damage may occur.
If equipped with a portability kit, always ensure the floor lock is engaged
before using the machine.
12
P3 All-Around Air Manual
Advertisement
Table of Contents
