Basic Use; Single Connection; Multi Connection - Panasonic PressIT TY-WPS1 Operating Instructions Manual

Basic Use

Single connection

This section describes how to display an image using
one transmitter.
1
Press the main button of the transmitter
while the standby screen is displayed.
The image is displayed.
09:40
Standby screen
White illumination
(standby)
Pressing the main button again changes the main
LED to white and returns to standby state.
(The screen returns to the standby screen as well.)
• When using multiple transmitters, the image is
switched to the image of the transmitter of which
the main button is pressed.
10 English
This section describes how to display images
simultaneously using multiple transmitters.
Images of up to 4 transmitters can be displayed
simultaneously.
1
Full screen display
Green illumination
(display)

Multi connection

Press and hold the sub button of the
transmitter for 1 seconds or more during
full screen display.
The sub LED changes to green illumination, and the
multi-screen mode is enabled.
1 1
Full screen display
1 1
Sub LED
OFF
1 1
Sub LED
Green illumination
(Multi-screen mode)