Goddess RDD144GW8A Instruction Manual page 52

ENG
Replacing LED lighting
If your refrigerator has LED lighting contact the help desk as this should be changed by
authorized personnel only.
5. TRANSPORTATION AND CHANGING OF INSTALLATION POSITION
• The original packages and foamed polystyrene (PS) can be retained if required.
• During transportation, the appliance should be secured with a wide string or a strong rope.
The instructions written on the corrugated box must be followed while transporting.
• Before transporting or changing the installation position, all the moving objects
(ie,shelves,crisper...) should be taken out or fixed with bands in order to prevent them from
getting damaged.
• Carry your fridge in the upright position.
CHANGING THE DOOR POSITION
Refer to the graphic instructions at the end of the manual.
6. BEFORE CALLING YOUR AFTER SALES SERVICE
If your fridge freezer is not working properly, it may be a minor problem, therefore to save time
and money, check the following, before calling an electrician.
What to do if your appliance does not operate
Check that:
• There is no power,
• The general switch in your home is disconnected,
• The thermostat setting is on "•" position ,
• The socket is not faulty. To check this, plug the appliance in to another socket which you
know is working.
What to do if your appliance performs poorly
Check that:
• You have overloaded the appliance,
• The thermostat setting is on position "1" (if so set the thermostat dial to a suitable value).
• The doors are closed properly,
• There is no dust on the condenser,
• There is enough space at the rear and side walls.
ENG - 52