Table of Contents
Advertisement
OPERATION
Understanding the Display
The Pro-3600's display can be set up to show Heading* and Mode
of Operation (Highway and City modes). In-between the Heading
and Mode of Operation one of the following can be displayed;
Temperature, Voltage or Clock*.
Heading
Selecting the Default Feature to be displayed
Press and hold the Dark button for four seconds or until 2 beeps
are heard. The display will change from Temperature to Voltage.
Pressing and holding the Dark button again for four seconds will
change the display to show the Clock. Repeat and Temperature
is once again selected.
Momentarily Display Features
Press and hold the Dark button for 2 seconds or until 1 beep is
heard and the unit will scroll and display the following for 3
seconds each: Temperature, Voltage, Clock and Vehicle Speed*
and then return to the default feature. Note: When unit is
displaying the vehicle speed the radar antenna is turned off!
Error Messages
Flashing character will be displayed in place of the Heading,
Clock or Speed when the GPS module is acquiring a signal.
Display showing "NO F", "NO : ", "NO V" indicates that
Temperature, Clock and Voltmeter have been turned off in
Option Mode.
*Heading, Clock and Speed are available with the optional RLC-
360 GPS module.
Mode of Operation
10
OPERATION
Temperature Display
The unit can be programmed to display either Fahrenheit or
Celsius. See Option Select Mode. Display shows:
• Ice Warning Mode: When temperature drops to 32 F display
shows:
Unit then gives a unique warning tone. This will happen again if
the temperature rises to 35 degrees or above then falls below 32
degrees.
When either Hi T or Lo T is displayed the limits of the temperature
sensor have been reached.
vehicle is stopped and idling, this is normal.
to
Note:
Temperature may rise while
11
Advertisement
Table of Contents
