Table Assembly (continued)
3
Tightening All Bolts
Once all of the bolts are in place, fully tighten
all the bolts using the hex wrench (FF).
Turn the table right side up and carefully place
the tiles (I) into the table rim (F).
Ensure that all connections are secure.
Care and Cleaning
Care
For best results, clean the frame and fabric with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt
particles that may accumulate.
Do not clean with abrrasive materials, bleach or solvents.
Store the set in a dry sheltered place when not in use.
I
F
9
Please contact 1-855-HD-HAMPTON for further assistance.
HOMEDEPOT.CA