If You Need Service Or Assistance - Whirlpool Thin Twin LT5004XS Use & Care Manual

Automatic washer dryer
Hide thumbs Also See for Thin Twin LT5004XS:
Table of Contents

Advertisement

If You Need Service Or Assistance
We suggest you follow
these five steps:
1. Before calling
for assistance...
Performance problems often result from
little things you can find and fix yourself
without tools of any kind.
If your washer
does not fill:
l
Is the power supply cord plugged into
a live circuit with the proper voltage?
l
Are both water faucets open?
l
Have you checked your home's main
fuses or circuit breaker box?
l
Are the water supply hoses kinked?
l
Is the Cycle Control Knob set and
pulled out?
If your washer
does not spin:
l
Is the lid closed?
l
Is the power supply cord plugged into
a live circuit with the proper voltage?
l
Have you checked your home's main
fuses or circuit breaker box?
If your washer
fills and drains
without
running:
l
The drain hose should be at least 26
inches above the floor and secured.
l
The drain hose should not fit tightly in
the drain pipe.
l
Make sure that the Cycle Control
Knob is pointing to a number in the
cycle.
Make sure the drain hose is higher
than the water level in the washer.
If it isn't:
l
The washer may seem to be draining
during wash and rinse cycles.
l
Water can siphon out.
(See Installation Instructions.)
If your washer
stops during
a cycle:
l
Remember, the washer pauses briefly
at different times in each cycle. These
pauses are normal.
If your dryer does not run:
l
Is the power supply plugged into a live
circuit with the proper voltage?
l
Is the door closed tightly?
l
Did you push the START Button?
l
Have you checked your home's main
fuses or circuit breaker box?
If your dryer does not heat:
l
The AIR setting is without heat.
l
The last 5 minutes of the HEAT Cycle
are without heat.
l
An electric dryer uses a circuit breaker
or 2 fuses. If one fuse is blown, the
dryer may run, but not heat.
If drying
time seems too long:
. Is the gas turned on? If not, turn the
Control Knob to OFF Turn on gas.
Wait 5 minutes. Reset controls and
start.
l
Is the lint screen clean? See pages
16-17of this book for cleaning
instructions.
l
Is exhaust system clean? Cleaning
should be done by a qualified person.
2. If you need assistance?..
Call Whirlpool
COOL-LINE@ serv-
ice assistance
telephone
number.
Dial free from anywhere
in the U.S.:
l-800-253-1301
and talk with one of our trained consul-
tants The consultant can instruct you in
how to obtain satisfactory operation
from your appliance or, if service is nec-
essary, recommend a qualified service
company in your area
18

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lt51ooxsLt5oooxsThin twin lt5100xsThin twin lt5000xs

Table of Contents