Balanced Body Clinical Reformer How To Assemble page 3

Install your padded footplate
Pull out the two round knobs on the
trunion plates and slide the footbar
all the way to the foot end of the
reformer. Loosen the two black knobs
on the back of the frame beneath
the built-in standing platform. Place
the tongue of the padded footplate
into the aluminum bracket on the
inside of the frame with the padded
side facing the carriage. Tighten the
two black knobs on the back of the
frame. Slide the footbar forward until
it clicks into the fourth hole. This
should bring it into firm contact with
the back of the padded footplate for
support while in use.
If you have any questions,
please call Balanced Body
at 1-800-PILATES
(1-800-745-2837) or
916-388-2838.
Ropes threaded through chrome
eyestraps and cam cleats
Footbar on last hole
Tongue of footplate in bracket
Footplates supported by footbar