Function And Device Overview - HomeMatic HmIP-BRA Mounting Instruction

Function and device overview

2 Function and device overview
The Homematic IP Button Rocker for brand switch
systems can simply be clicked to a Homematic IP
actuator (e.g. switch actuator or blind actuator for brand
switch systems) to switch the actuator via the push-
button rocker.
Installation is very easy thanks to the adapter that is
already inserted into the push-button rocker and the
design customised to Homematic IP actuators.
Due to the push-button design in the dimension of
55 mm, also most popular brand manufacturers can be
integrated as an alternative to the enclosed removable
frame.
Device overview (see figure 1):
(A)
Clip-on frame
(B)
Adapter
(C) Push-button rocker
(D)
Button 1 (e.g. on/higher/up, depending on the
Homematic IP actuator)
(E) Button 2 (e.g. off/darker/down, depending on the
Homematic IP actuator)
14