Table of Contents
Advertisement
● II 3 G Ex ec IIC T4 Gc
Type Examination Certificate: DEKRA 18 ATEX 0027X
Applied standards:
– EN 60079-0 - Explosive atmospheres - Part 0: Equipment - General requirements
– EN 60079-7 - Explosive Atmospheres - Part 7: Equipment protection by increased
The current versions of the standards can be seen in the EC Declaration of Conformity, see
above.
The conditions must be met for safe usage of the product according to the section Notes on
use in hazardous areas according to ATEX / IECEx (Page 26).
You should also note the information in the document "Use of subassemblies/modules in a
Zone 2 Hazardous Area" that you will find here:
● On the SIMATIC NET Manual Collection DVD under
"All documents" >"Use of subassemblies/modules in a Zone 2 Hazardous Area"
● On the Internet at the following address:
Link: (https://support.industry.siemens.com/cs/ww/en/view/78381013)
EMC
The product meets the requirements of the EC Directive 2014/30/EU "Electromagnetic
Compatibility" (EMC directive).
Applied standards:
● EN 61000-6-4
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard
for industrial environments
● EN 61000-6-2
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for
industrial environments
RoHS
The product meets the requirements of the EC directive 2011/65/EU on the restriction of the
use of certain hazardous substances in electrical and electronic equipment.
Applied standard:
● EN 50581
CP 1543-1
Operating Instructions, 12/2019, C79000-G8976-C289-08
safety 'e'
Approvals
83
Advertisement
Table of Contents
