Table of Contents
Advertisement
Approvals
You will find the EC Declaration of Conformity on the Internet at the following address:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/15340/cert)
The current versions of the standards can be seen in the EC Declaration of Conformity and
in the certificates.
IECEx
The product meet the requirements of explosion protection according to IECEx.
IECEx classification:
● Ex nA IIC T4 Gc
Certificate: IECEx DEK 14.0089X
Applied standards:
– EN 60079-0 - Explosive atmospheres - Part 0: Equipment - General requirements
– EN 60079-15 - Explosive atmospheres - Part 15: Equipment protection by type of
● Ex ec IIC T4 Gc
Certificate: IECEx DEK 18.0019X
Applied standards:
– EN 60079-0 - Explosive atmospheres - Part 0: Equipment - General requirements
– EN 60079-7 - Explosive Atmospheres - Part 7: Equipment protection by increased
You can see the current versions of the standards in the IECEx certificate that you can find
on the Internet at the following address:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/15340/cert)
The conditions must be met for safe usage of the product according to the section Notes on
use in hazardous areas according to ATEX / IECEx (Page 26).
You should also note the information in the document "Use of subassemblies/modules in a
Zone 2 Hazardous Area" that you can find on the Internet at the following address:
Link: (https://support.industry.siemens.com/cs/ww/en/view/78381013)
ATEX
The product meets the requirements of the EC directive:2014/34/EC "Equipment and
Protective Devices for Use in Potentially Explosive Atmospheres".
ATEX approval:
● II 3 G Ex nA IIC T4 Gc
Type Examination Certificate: DEKRA 12 ATEX 0240X
Applied standards:
– EN 60079-0 - Explosive atmospheres - Part 0: Equipment - General requirements
– EN 60079-15 -Explosive atmospheres - Part 15: Equipment protection by type of
82
protection 'n'
safety 'e'
protection 'n'
Operating Instructions, 12/2019, C79000-G8976-C289-08
CP 1543-1
Advertisement
Table of Contents
