Silvercrest SSOT 6 A1 Operating Instructions Manual page 22

Operation
Do not use the appliance immediately after cleaning
the measuring head
of the detergent may falsify the measuring result.
Sample applications:
- The temperature of milk in baby bottles
- The temperature of bathwater
1. If the sleep mode has been activated, activate the
thermometer again by pressing any button before
taking a measurement.
2. Carefully press on the protective cap
it with a gentle rotary motion and without using any
force.
3. Make sure that the measuring head
measuring sensor are clean.
4. Press the "FOREHEAD" button
button
3
is shown in the LC display
5. Hold the measuring head at a distance of 1 cm from
the liquid and / or surface whose temperature you
want to measure.
6. Press the "EAR" button
7. Now you can read off the measurement result on the
LC display
8. Values can be displayed in °C as well as in °F
(see "Functions / error analysis - selecting the
temperature unit").
22 GB/IE
. The evaporative cooling eff ect
2
repeatedly at the same time until "Food"
3
(Illustration E).
5
and remove
9
and the
2
and the "EAR"
4
(Illustration E).
5
to start the measurement.