Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Adler BOOST-18/1
Summary of Contents for Adler BOOST-18/1
- Page 2 PARAMETERS Model BOOST-18/1 BOOST-20/1 Voltage 230V/50Hz 230V/50Hz Power (min/max) 200W 300W Charging Current 12/24V 12/24V Max. Charging Current 8/5A 12/8A Fast Charge (min/max) Ah 15h (min/max) Ah 15h Battery Capacity 60÷200 25÷120 max – 120 Ah 15h Isolation Class Protection Class...
- Page 3 WARNINGS: Electric Shock Poisonous Fumes Danger of Explosion Non-Ionizing Radiation Face Shield and Eye Protection Personal Protection Equipment General hazard Separation of electrical and electronic appliances for refuse collection. The user is not allowed to dispose of these appliances as solid, mixed urban refuse, and must do it through authorised refuse collection centres PLEASE, CAREFULLY READ THIS MANUAL BEFORE OPERATION...
- Page 4 1. DEVICE OUTLOOK 1. Main switch 2. Charge/start switch 3. Fuse 4. 12/24V switch 5. fuse 6. Ammeter 7. Black cable with clamp (-) 8. Red cable with clamp (+) 9. Power supply (back) 2. GENERAL APPLICATION ThIs battery charger is dedicated for regular and boost charging and starting engine-driven vehicles (petrol and diesel), equipped with free electrolyte lead acid batteries (WET).
- Page 5 3. GETTING READY - Before charging, make sure the capacity of the battery (Ah) corresponds to the range given on the rating plate. - Remove tha caps of the battery (if present) to let the fumes out. - Check that the level of electrolyte covers the plates of the battery. You can add distilled water, following marks on the battery.
- Page 6 6. END OF CHARGE - Remove the power supply from the battery charger by turning the switch to OFF and/or removing the power supply cable from the mains outlet. - Disconnect the black charge clamp from the chassis of the vehicle or from the negative terminal of the battery (- symbol).
Need help?
Do you have a question about the BOOST-18/1 and is the answer not in the manual?
Questions and answers