Page 2
Maintenance ..............................4 Transportation and storage ......................... 5 Scope of delivery ............................5 Appendix A. Dimensions ............................ 5 akYtec GmbH · Vahrenwalder Str. 269 A · 30179 Hannover · Germany · Tel.: +49 (0) 511 16 59 672-0 · www.akytec.de...
Page 3
The device should not be used in an explosive environment. – The device should not be used in an atmosphere with chemi-cally active substance. akYtec GmbH · Vahrenwalder Str. 269 A · 30179 Hannover · Germany · Tel.: +49 (0) 511 16 59 672-0 · www.akytec.de...
Page 4
Carefully position the supplied gasket on the display rear surface. Insert the cylindrical part of the device into the borehole and tighten the nut from the rear side of the switch panel. akYtec GmbH · Vahrenwalder Str. 269 A · 30179 Hannover · Germany Tel.: +49 (0) 511 16 59 672-0 · www.akytec.de...
Page 5
(connecting leads, fastenings, mechanical damage) The device should be cleaned with a damp cloth only. No abrasives or solvent-containing cleaners may be used. akYtec GmbH · Vahrenwalder Str. 269 A · 30179 Hannover · Germany Tel.: +49 (0) 511 16 59 672-0 · www.akytec.de...
Page 6
To prevent the device spinning, the borehole in the front panel must correspond to the dimensions in Fig. A.2. akYtec GmbH · Vahrenwalder Str. 269 A · 30179 Hannover · Germany Tel.: +49 (0) 511 16 59 672-0 · www.akytec.de...
Need help?
Do you have a question about the INS-F1 and is the answer not in the manual?
Questions and answers