Advertisement
Operating
Your Washer
In This Section
Page
Page
Before starting
your washer ..............................
5
Selecting
a cycle and time ..............................
6
Starting
or stopping
your washer
.................... .5
Using rinse and spin .......................................
9
Selecting
a load size ..........................................
5
Using drain and spin .......................................
9
Selecting
wash-rinse
temperatures
................. .6
What happens
in each cycle .........................
10
Operating
your washer properly
assures maximum
washing
efficiency.
This section gives you
important
information
to help you to select a cycle, time, and temperature
for your wash load.
Before
starting
your
washer
Add measured
detergent.
Then place a sorted
NOTE:
If your washer has a Consumer
Buy
load in the washer before starting.
See page 14
Guide, remove it and place it in your Use and
for additional
"Before you wash" information.
Care Guide.
Starting
or stopping
your
washer
Starting
your washer:
1. Push in the Cycle Control Knob and turn it
clockwise.
Stop when the indicator on the
knob's outer ring points to the number in the
wash cycle you want. The numbers
are
minutes of wash time.
2. Select a load size and water temperature.
3. Pull out the Cycle Control Knob.
Refer to pages 6-l 0 for additional
information
to help you make selections.
Stopping
and restarting
your washer:
l
To stop the washer at any time, push in the
Cycle Control Knob.
l
To restart the washer, close the lid (if neces-
sary) and pull out the Cycle Control Knob.
Selecting
a load
size
Your washer has a knob or slide Load Size
Selector.
Position the Load Size Selector
at the
setting that corresponds
to the size load you
want to wash.
Select a load size based upon the size of the
load and the fabric you are washing.
See
page 14 for additional
loading information.
l
If your washer has a knob Load Size Selec-
tor, turn selector to the desired load size.
Advertisement
