Operating Your Washer; Starting Your Washer - Whirlpool LLR9245BQ1 Use And Care Manual

Operating Your Washer
To obtain the best washing results, you must operate your washer properly.
This
section
gives
you this information.
NOTE: Before using your washer, remove the consumer Features
Guide
from your washer
and place it with your Use and Care Guide.
Starting Your Washer
1.
2.
3.
4.
5.
Add measured detergent to the
washer. Then place a sorted load of
clothes in the washer (see page 12).
l
Sort and load clothes as described on
page 12.
l
If desired, you may also add color-safe
all-fabric bleach or extra detergent for
the Super Wash cycle.
(OPTIONAL STEP) If desired, add
measured liquid chlorine bleach to the
liquid bleach dispenser (see page 10).
l
Use only liquid chlorine bleach in the
bleach dispenser.
l
For optimal brightening and bleaching,
liquid chlorine bleach is
automatically
diluted and dispensed in the last
few
minutes of the wash cycle.
(OPTIONAL STEP) If desired, add
measured fabric softener to the fabrk
softener dispenser (see page 10).
l
The fabric softener dispenser automati-
cally dilutes and releases the fabric
softener at the proper time in the rinse
cycle.
. Water rinses the dispenser so clogging
does not occur.
Close the washer lid.
Turn the Load Size Selector to the
setting that corresponds to the size of
the wash load and the type of fabrk
being washed.
. Select any one of five load sizes:
Extra Small, Small, Medium, Large, or
Extra Large.
l
To change the load size setting after the
washer has started to fill, turn the
Selector to the desired new setting.
l
See pages 12-l 3 for loading tips.
5