Table of Contents
Advertisement
Operating
Your Washer
To obtain the best washing results, you must operate your washer properly. This section
gives you this important information.
Page references are included for more information.
Starting
your washer
1. Add measured
detergent
to the
washer. Then place a sorted load of
clothes
in the washer.
l
Sort and load clothes as described on
pages 13 and 14.
l
If desired, you may also add color safe
bleach or extra detergent for the Super
Wash cycle.
2. (OPTIONAL
STEP) If desired,
pour
measured
liquid chlorine
bleach into
the bleach dispenser.
See page 11.
l
Use only liquid chlorine bleach in the
bleach dispenser.
3. Close the washer
lid.
4. Turn the Load Size Selector
to the
setting that corresponds
with the size
of your wash load and the type of
fabric being washed.
l
The Load Size Selector has three load
size settings: small, medium, and large.
l
To change the load size setting after the
washer has started to fill, turn the
Selector to the desired new setting.
5. Select a wash-rinse
temperature
with
the Water Temperature
Selector.
Match
the water temperatures
with the type of
fabric and soils being washed.
l
See page 15 for water temperature
guidelines.
l
Three wash-rinse temperatures
are
available: hot-cold, warm-cold, and
cold-cold.
bleach dispenser
I
Medium
I
Load Ske
Wash
RlnM
Temperature
continued
on next page
5
Advertisement
Table of Contents
