Huawei AR1200 Series Usage Manual page 25

Huawei AR1200&2200&3200 Series Enterprise Routers
SAE Card Usage Guide
Context
After the boot priority in the BIOS system is set to the network, the SAE board automatically
connects to the PXE server after startup, which enables you to install the operating system over
the network.
Procedure
Step 1 Connect a USB mouse, keyboard, and monitor to the SAE board, and connect a network cable
to interface GE0 or GE1.
Step 2 Power on the SAE board. Press DEL or F2 to enter the BIOS menu when the message "Press
<DEL> or <F2> to enter setup" is displayed.
Step 3 Press the arrow keys to choose the Chipset menu, as shown in
Figure 5-4 Chipset menu
Step 4 Choose PCH-IO Configuration, and set LAN1 Option-ROM or LAN2 Option-ROM to
Enabled, as shown in
Issue 02 (2012-08-30)
NOTE
The SAE board provides two USB2.0 ports. You can use a USB hub to obtain more USB ports.
Ensure that the SAE board is properly connected to the PXE server over the network.
Figure
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Installing the Operating System on the SAE Board
5-5.
Figure 5-4.
19