Connecting The Sae Board - Huawei AR1200 Series Usage Manual

Huawei AR1200&2200&3200 Series Enterprise Routers
SAE Card Usage Guide
This section describes how to connect the SAE board to the network.
Figure 4-1 Connection diagram of the SAE220 board interfaces
1: Console cable
l The 8-pin RJ45 connector is inserted into the Console port (CON/AUX port) of the SAE
l The DB9 male connector is connected to a maintenance terminal, such as a computer.
2: USB port cable, used to connect to a mouse, keyboard, flash memory, or USB drive.
3: VGA interface cable, used to connect to a computer monitor. The cable connectors are both
DB15 male connectors.
Issue 02 (2012-08-30)
4
NOTE
SAE220 and SAE550 have the same interfaces. The following takes the SAE220 board as example.
board.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.

Connecting the SAE Board

USB flash drive/
USB CD-ROM
4 Connecting the SAE Board
4
Network Network
12