Pip; Switch Input Source; Software Operation - Feelworld LIVEPRO L1 User Manual

2.3.3 PIP (Picture in Picture)
Push SW button 3 times to open PIP menu. PIP menu offers 9 layouts for main
picture and sub picture.
PIP operation
1. Decide which source to be the main picture, select and switch it to PGM when
PIP is OFF
2. Select the PIP layout mode in PIP menu
3. Select the input source and switch it to sub-picture on PGM
4. After switching, the selected green button turns to red.
After PIP mode is selected, the main picture can not be changed unless
go back to choose PIP OFF and restart the above steps.
2.3.4 FX
FX is advanced features asking for license, reserved for future development.

3.Switch Input Source

After selecting transition effect and switch mode
.Under Fast+Time mode, pushing green button will switch the input source in
1
the selected time with set transition effect. After switching , green turns to red.
.Under T-Bar mode, pushing green button, it will flash and push T-Bar to the
2
end (left or right), the source will be switched with selected transition effect. After
switching , green turns to red.
Note: When T-Bar is not in the end position, no source can be selected.

4.Software Operation

After software is installed, click the icon
to search LIVEPRO L1 device.
and login the software. Click Search
12