Download Print this page

Included In The Box - MFJ -1888 Instruction Manual

Enhanced receiving loop and multicoupler

Advertisement

Thank you for purchasing the MFJ-1888 receive loop antenna. You new antenna is composed of
High strength material for excellent rigidly and light weight. The MFJ-1888 is compact and excellent
for restricted space or portable installations. The MFJ-1888 antenna frequency range extends above 30
MHz all the way down below the 500 KHz. The antenna has strong null points and a rotator is
recommended for seeking out weak stations by eliminating noise or other stations. It can be mounted on
a tripod for temporary locations or any mast 1-3/4 diameter or smaller for permanent installation.
This antenna is fully assembled and ready to mount. Pick a mounting location well away from any
other transmitting antennas. Transmitting signals close to the MFJ-1888 will damage the internal
amplifier. This antenna can be used indoors if desired. Rotating the antenna by hand is a good way
to null noise or other broadcast stations in the area. Indoor locations tend to have more noise sources
than outdoor locations so keep that in mind if you decide to use the antenna inside.

Included in the box:

Outdoor Receiving Loop
MFJ Active Receiving Loop Antenna
Indoor Receive Multicoupler
Enhanced Receiving Loop Antenna with Four Port Multicoupler
ON
ON
OFF
Model MFJ-1888-MC
POWER
13.6V Power Adapter
U-Bolts
MFJ-1888
WARNING
KEEP THE ANTENNA AWAY FROM POWER LINES
Never mount or move any antenna where it can come into contact
with power lines. If this antenna comes into contact with power
lines, it can KILL you. Never mount any antenna where if it falls it
could come into contact with power lines.
WARNING
DO NOT TRANSMIT into the Multicoupler. The receive
preamplifiers will be damaged.

Advertisement

loading