Selecting A Cycle And Time - Estate TAWMZOOA Use And Care Manual

Water temperature tips
l
Use warm or hot wash water with permanent
press fabrics.
l
For heavily soiled permanent press or knit
clothes, pre-wash or pre-soak in warm water
before washing.
See the "Waler usage guide' on page 15 for
more information.
Selecting a cycle and time
You will find information you need to help you
make correct cycle selections in this section.
l
Pages 7-8: Use the information on these
pages to guide you when selecting a wash
cycle and time.
. Page 9: Use this page to help you under-
stand what happens during a wash cycle
NOTE:
Your washer selects a wash water
temperature and time when you select a wash
cycle. You may select different wash times by
first selecting the water temperature and then
turning to the new wash time. For example, if
you desire 14 minutes wash time with cold
water:
1.
Push in the Cycle Control Knob and turn it
clockwise to NormalB (cold wash water).
2. Pull out the Cycle Control Knob and allow
your washer to fill.
3. When your washer has filled, push in and
turn the Cycle Control Knob clockwise to
Heavy-14. (Your washer may add a small
amount of additional warmer water, but this
should not affect the overall desired wash
water temperature.)
4. Pull out the Cycle Control Knob..
Heavy cycle
The Heavy cycle features hot water for heavy
soils and longer spins to shorten drying time.
l
Use 14 minutes of wash time to clean sturdily
constructed fabrics and heavily soiled loads.
Wash water tempe:ahrre
I NORMAL #I
I
I
Heavy cycle
6