Whirlpool RAM4143A Use And Care Manual page 8

What happens in each cycle
When the Cycle Control Knob is set to a
number
and
pulled out, the washer fills to the
selected load size with the selected water
temperature before agitation and timing start.
The washer will begin agitating immediately
after filling; agitation can occur with the washer
lid up or down. After agitation starts, the knob
turns clockwise until it points to OFF and the
cycle ends.
The washer pauses brldly throughout
each cycle. These pauses are normal for
washer operation.
Regular and Short cycles
Fill to selected load size
Wash selected time
Drain-No agitation
Spin
Fill
Rinse
Drain-No agitation
Spin
Permanent Press cycle
Fill to selected load size
Wash selected time
Fill to selected load size
Brief agitation
Drain-No agitation
Spin
Fill
Rinse
Drain-No agitation
Spin
8