Adjusting The Leveling Feet; Removing The Shipping Bolts - Samsung WD7101CKC User Manual

ADJUSTING THE LEVELING FEET

If the floor is uneven, adjust the feet (do not insert pieces of
wood or any other objects under the feet):
1. Loosen the leg bolt by turning it with your hand until it is at
the desired height.
2. Tighten the locking nut by turning it with a (-) screwdriver.
If the washer is placed on an uneven or weak surface, noise or
vibration occurs.
(Only a l degrees angle is allowed.)

REMOVING THE SHIPPING BOLTS

Before installing the washing machine, you must remove the five
shipping bolts from the back of the unit.
1. Loosen all the bolts with the supplied wrench.
2. Hold the bolt with the spanner and pull it through the wide
section of the hole. Repeat for each bolt.
3. Fill the holes with the supplied plastic covers.
4. Store the shipping bolts away safely in case you have to move the washing machine in the
future.
Packaging materials can be dangerous to children; keep all packaging material (plastic
bags, polystyrene, etc.) well out of the reach of children.
WARNING
WD7101CKW-02502D-03_EN.indd 7
Installing the washing machine _7
2008-08-22 ¿ÀÈÄ 7:11:48