To Add Laundry; Using Clean Tub - Samsung WD7101CKC User Manual

TO ADD LAUNDRY

1. Press the Stop&Add button.
•
2. Wait about 30 seconds and check the Stop&Add button for the lamp state.
•
•
The washing machine detects the internal quantity of laundry about 30 seconds before
deciding whether it could get more laundry.
3. Add the laundry.
4. Press the Start/Pause Button.
•

USING CLEAN TUB

Is a course for washing the tub.
1. Press Power button.
2. Select the Clean Tub Course by turning the dial of Course Select.
3. Put an adequate amount of bleaching agent in the detergent tray ( ) for Main Laundry.
(See "Washing for the first time".)
: You'd better use a powder-type detergent for more efficient washing.
If you want to wash it lightly : You may wash it just by selecting the 40°C-Water without
bleaching agent.
4. Press Start/Pause button.
About one time a month is enough for the tub-washing.
WD7101CKW-02502D-03_EN.indd 17
The washing machine will automatically pause to operate.
Blinking: the machine drains water down to the safety level so it can get an additional
quantity of laundry (displayed in pause mode)
Off: adding the laundry is possible.
Avoid adding the laundry when the machine has foamed up or is filled with water.
Otherwise, the foam or water may leak out of the door. So check it first before opening
the door.
Washing a load of laundry _17
2008-08-22 ¿ÀÈÄ 7:11:55