FATEK FB Series Manual page 35

Setup Items
Stop Bit
Flow Control
Timeout
Retry
Wait To Send
Device Setting
To display the setting screen, touch [Device/PLC Settings] from [Peripheral Equipment Settings]. Touch the
External Device you want to set from the list that appears, and touch [Device Settings].
Setup Items
Device/PLC Name
Station No.
GP-Pro EX Device/PLC Connection Manual
Select a stop bit length.
Select the communication control method to prevent overflow of transmission and
reception data.
Enter the time (s) for which the Display waits for a response from the External Device,
from "1 to 127".
In case of no response from the External Device, enter how many times the Display
retransmits the command, from "0 to 255".
Enter the standby time (ms) from when the Display receives packets until it transmits the
next command, from "0 to 255".
Select the External Device to set. Device name is the title of the External Device set with
GP-Pro EX. (Initial value [PLC1])
Enter the station No. of the External Device, from "1 to 254".
Setup Description
Setup Description
35
FB Series SIO Driver