Solutions To Hdmi Link Problems; Solving Network Problems - Epson LS500W User Manual

Related references
Remote Control Operation
Related tasks
Replacing the Remote Control Batteries

Solutions to HDMI Link Problems

If you cannot control an HDMI device using the HDMI Link buttons, try the following solutions:
• Make sure all necessary cables are securely connected and the power is on for the projector and
connected video sources.
• Make sure the cables meet the HDMI CEC standard.
• Make sure the connected device meets the HDMI CEC standard. See the documentation supplied
with the device for more information.
• Make sure the HDMI Link setting is set to On.
• Check if the device is available in the Device Connections list in the Settings menu. If the device
does not appear, it does not meet the HDMI CEC standards. Connect a different device.
• Make sure the connected devices are turned on and in standby status. See the documentation
supplied with the device for more information.
• If you connected a new device or changed any connections, make sure the CEC function is set for the
connected device. You may need to restart the device.
• Connect no more than three devices that support HDMI Link at the same time.
• If you have connected a speaker or receiver, set the output to PCM.
• If your projector shuts itself off, the connected video source may be turning off the projector. Try
turning off the HDMI Link setting on the projector and video source. See the documentation for your
device for information on how to disable the HDMI Link setting.
Parent topic:
Related references
Projector Feature Settings - Settings Menu

Solving Network Problems

Check the solutions in these sections if you have problems using the projector on a network.
Solutions When Wireless Authentication Fails
Solutions When the Image Contains Static During Network Projection
Solving Projector or Remote Control Operation Problems
142