Connecting To External Speakers - Epson LS500W User Manual

1. Connect the HDMI cable to the ARC-compatible HDMI port on your external speakers or A/V
receiver.
Note: To display signals in the 18 Gbps transmission band, such as from a 4K 60 fps source, use a
cable rated for HDMI 2.0 or higher or you may have trouble displaying an image. If you experience
any trouble displaying images at 18 Gbps, change the EDID setting to Normal.
2. Connect the other end to the HDMI2 (ARC) port on the rear of the projector.
3. Select any HDMI control settings on the connected speakers or receiver, as necessary. See your
device's documentation for more information.
Parent topic:
Related references
Projector Feature Settings - Settings Menu
Input Signal Settings - Signal Menu

Connecting to External Speakers

To enhance the sound from your video source, you can connect the projector to external self-powered
speakers. You can control the projector's output volume using the projector's remote control.
You can also connect the projector to an amplifier with speakers. This bypasses the internal speakers.
1. Make sure your computer or video source is connected to the projector with both audio and video
cables as necessary.
2. Locate the appropriate cable to connect your external speakers, such as a stereo mini-jack-to-pin-
jack cable, or another type of cable or adapter.
3. Connect one end of the cable to your external speakers as necessary.
Projector Connections
37