Install Inside Blss Rose Assembly; Install Inside Lever Assembly - Assa Abloy Corbin Russwin BLSS ML2000 Series Installation Instructions Manual

BLSS Freewheeling Trim Retrofit
ML2000 Series
Installation Instructions
4 Installation (cont .)
e

Install Inside BLSS Rose Assembly

Attach inside rose assembly to inside adapter plate using four (4) security Torx screws. Tighten screws
evenly. (Figure 11)
f

Install Inside Lever Assembly

• Install inside Spindle. (Figure 12)
• Install inside BLSS lever assembly to inside adapter plate assembly using security torx set screw.
IMPORTANT
• Line up rose screw with gap on spring cartridge.
• Make sure machined end of spindle seats into clutch adapter before assembling lever onto rose.
(Figure 12)
Note
• Inside of LHR shown.
• Shorter spindle used
on inside.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Figure 11
Note position and
orientation of spindle.
LHR Inside
Shown
IMPORTANT
Screw oriented
towards latchbolt
Gap
Rose Screw
Figure 12
7
Security
Torx
Screws
Machined End
Spindle
Security
Torx Set
Screw
FM522 08/19