Target Groups; General Definitions Of Terms - Record FlowControl User Manual

2.6

Target groups

This operating manual is intended for the target groups listed below:
▪ Operating entity of the system:
the person who is responsible for the technical maintenance of this system
▪ Operator of the system:
the person who operates the system every day and has been suitably instructed
2.7

General definitions of terms

The following terms are used in manuals for easier understanding:
Term:
System
Manufacturer
Operator
Personnel
Expert
Service technician
BAL_FlowControl_EN_1V2_REC_121-006454644
CAUTION
Risk of injury if personnel are insufficiently qualified!
If unqualified personnel work on the system or are in the danger zone of the sys-
tem, dangers may arise which can cause serious injuries and considerable da-
mage to property.
• All work must be carried out by qualified personnel only.
• Keep unqualified personnel away from danger areas.
Explanation:
System describes the door drive of the company Blasi GmbH,
Carl-Benz-Str. 5-15, D - 77972 Mahlberg.
Whenever instructions refer to a specific design, it will be spe-
cifically emphasized in the text.
The manufacturer of the system is the company Blasi GmbH,
Carl-Benz-Str. 5-15, D - 77972 Mahlberg.
The operator of the system is referred to as the owner, regar-
dless whether he operates it as owner or discloses it to a third
party.
All individuals referred to as personnel are those who perform
any task on or with the system during its lifespan and are quali-
fied to perform such task according to the manufacturers crite-
ria and are therefore deemed authorized.
Expert refers to all individuals who are authorized to carry out
specific tasks on the system based on their qualifications.
For example, an electrician specialized in connecting the sys-
tem to the main power supply is considered a expert.
Experts and specialists or representative authorized by the
manufacturer to perform commissioning, maintenance and
servicing.
General information
2
11/ 25