Advertisement
Rewrite the Arduino Program
In the case of 1. or 2. below, please rewrite the program to
the Arduino
1. When updating the API Function library.
a) Delete the existing API function library by
navigating to Documents\Arduino\libraries and
deleting the LV8702_APILibrary folder.
b) Include the latest API function library. Please
save the latest API function library in your
preferred directory on your PC.
(See Page 3,
"Software
Include the latest API function library.
(See Page 3
"API
c) Compile and write the program to the Arduino
(See Page 4,
"Compiling the Arduino program
S Write to
Arduino")
2. When evaluating the LV8548 DC and other motor
driver modules.
(Assuming other motor driver module libraries
have already been included)
a) Compile and write the program to the Arduino
(See Page 4,
"Compiling the Arduino program
S Write to
Arduino")
If you are testing the any other motor driver module
library for the first time, please operate according to their
corresponding manual.
GUI Installation
1. Double click on
with the installation as shown below.
*If a previous version of this GUI
(ON_MD_Module_Kit_GUI) has already been
installed and the most recent GUI will be installed,
please overwrite and update the existing GUI.
(No need for uninstallation)
2. The .NET Framework4.6.1 installation window
will appear if the PC does not have the necessary
LV8702VSLDGEVK
Setup")
Library")
in the
folder and proceed
www.onsemi.com
version. If .NET Framework4.6.1 is not installed,
click Accept to install.
The following window shows the installation in progress.
(This may take several minutes)
If the installation requires a reboot to complete, a message
will appear on the screen. Please press "Yes" to reboot.
Once rebooted, run
5
installation file again.
Advertisement
