What You Need; Contents Of The Kit - ON Semiconductor LV8702VSLDGEVK Quick Start Manual

WHAT YOU NEED

•
PC
Recommended OS: Windows 7/Windows 10, 64 bit
Connected to the Internet
(Only for "Including the TimerOne Libary"
3)
Arduino IDE 1.8.4 Installed
User with an Administrator rights
•
Power Supply
AC Adapter Output voltage: 9~32 V
Output current: ~5 A
Connector specification
Polarization: Positive Center
Inner diameter = 2.1 mm, outer diameter = 5.5 mm
Recommended: WSU120−1000 (Triad Magnetics)
or stabilized DC power supply, dry cell battery, etc.

CONTENTS OF THE KIT

Hardware
•
LV8702VSLDGEVB: Motor driver module
•
ONBB4AMGEVB: Baseboard
•
Arduino Micro
•
USB Cable (Micro B−A)
•
Flat−tip Screw Driver
•
Stepper motor MDP−35A
(Nidec Seimitsu, Step angle= 7.5 deg, 12 V/ 300 mA) 1 pc
Software
All of the following files are included in LV8702VSLDGEVK Software (English) that is available on the website of the
following links.
http://www.onsemi.com/PowerSolutions/evalBoard.do?id=LV8702VSLDGEVK
3)
Contents of kit may not be compatible with different versions. Please see the
LV8702VSLDGEVK
on Page 3)
. . . Arduino IDE Installer
. . . GUI as well as .NET Framework4.6.1 Installer
. . . .NET Framework4.6.1 Related Files
. . . API Library
. . . GUI − Arduino Firmware
Appendix
www.onsemi.com
2
attached if specified version is not installed