Advertisement
Depending on your broadband connection
(ADSL, VDSL or Fibre) please follow the steps below:
1. For ADSL or VDSL Connections
1.
Connect the microfilter to your
phone wall socket.
2.
Then connect the provided phone
cable from the Modems DSL Port to
the Microfilter.
2. For Fibre Connections
Connect the yellow ethernet cable from the
red WAN Port of your modem router to
either the LAN1 or GE1 Port of your ONT. Your
ONT will be located on your wall. (See below
for details) .
Your Optical Network Terminal (ONT)
If you have a fibre network connection installed, there will be an ONT attached to an
inside wall of your house. These are the under side views of the two most common
types of ONT.
Connect this port to your
NOTE: Make sure the ONT is plugged into the power supply and is turned on.
3. Connecting to the Power
Plug the power adapter into your modem then connect to your nearest wall power point.
Turn on the modem and make sure the Power LED is on.
(Refer to section 7- Know Your Modem—LED Lights)
Connect this port to your
Advertisement
