Reebok V8.90 User Manual page 20

THE INFORMATION MODE
The console features an information mode that keeps
track of treadmill usage information. The information
mode also allows you to select miles or kilometers as
the unit of measurement and to turn on and turn off the
display demo mode. You can also turn on or turn off
the personal trainer and adjust the volume level.
To select the information mode, hold down the Stop
button, insert the key into the console, and then re-
lease the Stop button. When the information mode is
selected, the following information will appear in the
display:
The lower left
corner of the
display will
show the num-
ber of hours
that the tread-
mill has been
operated. The
lower right cor-
ner of the display will show the total number of miles or
kilometers that the walking belt has moved.
An E for English miles or an M for metric kilometers
will appear in the display. To change the unit of mea-
surement, press the Speed increase button.
The console features a display demo mode, designed
to be used if the treadmill is displayed in a store. While
the demo mode is turned on, the console will function
normally when you plug in the power cord, press the
power switch into the reset position, and insert the key
into the console. However, when you remove the key,
the displays will remain lit, although the buttons will not
function. If the demo mode is turned on, a "d" will ap-
pear in the lower right corner of the display while the
information mode is selected. To turn on or turn off the
demo mode, press the Speed decrease button.
You can select an audio setting for your personal
trainer if desired. When you use an iFit card, a per-
sonal trainer will guide you through your workouts. To
turn on or turn off the voice of the personal trainer,
press the Incline decrease button. The word ON or the
word OFF will appear in the display.
To adjust the volume level, press the Incline increase
button.
To exit the information mode, remove the key from the
console.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the consoleʼs
stereo speakers, you must connect your MP3 player,
CD player, or other personal audio player to the con-
sole through the audio jack.
To use the audio jack, locate the audio wire and plug it
into the audio jack near the speakers. Then, plug the
audio wire into a jack on your MP3 player, CD player,
or other personal audio player. Make sure that the
audio wire is fully inserted.
Next, press the Play button on your MP3 player, CD
player, or other personal audio player. Adjust the vol-
ume on your personal audio player or with the Vol in-
crease and decrease buttons on the console. Note: If
the volume cannot be turned up, make sure that the
volume level is not set at 0 (see THE INFORMATION
MODE on this page).
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat sur-
face instead of on the console.
20