Transporting And Unpacking; Bringing In Items; Unpacking - Samsung MT6402-48A Installation Manual

Transporting and Unpacking

This section describes how to transport the items to the installation place and
provides the procedure to unpack cabinets and other components.

Bringing in Items

Ensure the following at each stage of transporting the items:

Before moving a system, check storage place for the system and remove
obstacles in advance.

When carrying the system:
o Fasten the system firmly to the transport vehicle or carrier to prevent
o Use an elevator to prevent accidents.
o If the system must be carried by people, ensure there are enough people to

The system must not be shocked physically.

The system should be protected from dust, moisture, and static electricity.

Unpacking

To unpack the items, ensure the following:

The items must be packed until those reach the installation place.

The items are classified in accordance with each job specification and stored in
a place that does not interfere with working.

Unpacked systems must be installed immediately. If immediate installation of
the systems is not planned, the systems must be stored in the installation place
temporarily.

Unpack only external packing, leave the internal packing in unpacked status.

Unpack the inner packaging after each system is placed on its installation
location.

Dispose by-products (packaging waste) in accordance with management rules.
Do not recycle the by-products.
MT6402-48A Installation Manual v1.0
Copyright © 2019, All Rights Reserved.
damage to the system from a vibration or shock.
carry the system.
Confidential
Chapter 2 Installing System
15