Qualcast AQP-PC 4645 Assembly Manual page 9

Assembly
Step 3
3a
3a. Place the saw chain onto the drive sprocket
WARNING! Always wear suitable gloves when assembling or maintaining the saw chain.
NOTE! Ensure the saw chain is in the correct orientation as described in step 2 before fitting to the
drive sprocket.
Wearing suitable gloves, carefully lift one end of the saw chain
the drive sprocket
on the drive sprocket
L . Ensure the teeth on the underside of the saw chain
L .
Customer Helpline 0151 649 1500
over the clutch and place onto
fit correctly into the slots
9