Assembly
Step 5 (continued)
IMPORTANT! Do not fully tighten the guide bar fastening nuts
allow the position of the guide bar
Align the holes in the chain brake lever assembly
Push the chain brake lever assembly
NOTE! If the chain brake lever assembly
tensioning bar
N
position of the tensioning bar
Refit the two guide bar fastening nuts
Step 6
6a
6a. Adjusting the saw chain tension
WARNING! Always wear suitable gloves when assembling or maintaining the saw chain.
14
C
to be adjusted in the following step.
B
fully against the main body
B
proves difficult to fit, check the alignment of the
(see step 5a) with the lower slot
with the tension adjustment screw
N
J
onto the location pins
P
Customer Helpline 0151 649 1500
J
. They must remain loose enough to
B
K
with the location pins
.
in the guide bar
. If necessary, adjust the
C
S
.
K
and tighten by hand.
.